Accessories; Standard Accessories; Optional Accessories...sold Separately - Metabo HPT DH 26PC Manual De Instrucciones E Instrucciones De Seguridad

English
WARNING
ALWAYS use Only authorized metabo HPT replacement parts and accessories. Never use replacement parts
or accessories which are not intended for use with this tool. Contact metabo HPT if you are not sure whether
it is safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

(1) Plastic Case (Code No. 335257) (for DH26PC) .........................................................................................................1
(Code No. 370155) (for DH26PF, DH28PFY) .......................................................................................1
(2) Side Handle (Code No. 335273) ...............................................................................................................................1
(3) Depth Gauge (Code No. 310331) ..............................................................................................................................1

OPTIONAL ACCESSORIES...sold separately

1. Drilling anchor holes (Rotation + Hammering)
Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank)
External dia.
7/16" (11 mm)
1/2" (12.3 mm)
1/2" (12.7 mm)
9/16" (14.3 mm)
9/16" (14.5 mm)
11/16" (17.5 mm)
7/8" (21.5 mm)
14
000Book_DH26PC_NA_metabo.indb 14 000Book_DH26PC_NA_metabo.indb 14

ACCESSORIES

(2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)
Code No.
944460
944461
993038
944462
944500
944463
944464
Taper mode Code No.
Drill bit
Morse taper
303617 (Taper
(No. 1)
shank)
Drill bit
Morse taper
303618 (Taper
(No. 2)
shank)
Taper shank adaptor
A-taper 303619
formed A-taper or B-taper
is provided as an optional
accessory, but drill bit for it
B-taper 303620
is not provided.
1/2" (13 mm) Hammer Drill chuck and Chuck wrench
For drilling operations when using a straight shank bit
for impact drilling with a rotary hammer
Impact Drill 1/2" (13 mm) Hammer Drill
Application Chuck (SDS-plus shank)
Straight shank Bit (includes Chuck wrench)
Applicable drill bit
7/16" (11 mm)
1/2" (12.3 mm)
1/2" (12.7 mm)
9/16" (14.3 mm)
9/16" (14.5 mm)
11/16" (17.5 mm)
7/8" (21.5 mm)
Chuck wrench
2018/03/22 9:55:32 2018/03/22 9:55:32