RIB ACG9624 Manual De Instrucciones página 25

SYSTEM LAY-OUT
280/11,2"x300/12"
❶
❷
❸
❷
❸
❷
❸
1 - RAPID S barrier
2 - Photoelectric cells
3 - Galvanized column for P.E. cells
4 - Strip with Photo electric cells
Parts to install according to EN 12453 standard
COMMAND TYPE
Hold-to-run operation
Impulsive - in sight
(e.g. push-button)
impulsive - out of sight (e.g. remote)
automatic
* a typical example are those doors which do not have access to any public way
A: Hold-to-run operation made by push-button ex: code ACG2013
B: Hold-to-run operation made by key selector ex: code ACG1010
C: Adjustable power of the motor or photocells to respect impact forces as indicated in Annex A
D: Safety strips and/or other additional devices to reduce the probability of contact with the door.
E: Devices installed in such a way that a person can not be touched by the door.
❺
5 - Magnetic loop
- Key selector
- Tuned aerial
USE OF THE SHUTTER
Skilled persons Skilled persons
(out of public area*) (public area)
A B
C or E C or E
C or E C and D, or E
C and D, or E C and D, or E
3000/118" - 4000/157"
TECHNICAL FEATURES
❹
Ambidextrous irreversible gearmotor used to actuate booms up to 4 m / 157"
inches long.
The cabinet of the operator is treated with cataphoresis and thermal spray
coating. The barrier boom can be supplied as a single piece or, in the case
❷
high objects may hinder its travel, you can require it in the articulated version,
specifying the height of this obstacle from the ground.
The barrier boom with RIB profile is constructed for being fitted with a pneumatic
safety strip or with a photocell strip.
❸
N.B. You must make installation features comply with laws and standards in
force.
TECHNICAL DATA
Max. boom lenght
❷
Opening time
❸
EEC Power supply
Motor capacity
❷
Power absorbed
❸
Capacitor
Max. torque
EEC Power supply
Motor capacity
2
Power absorbed
Capacitor
Max. torque
Normative cycles 230V
Normative cycles 120V
Daily operations suggested
Service
Not skilled persons
Guaranteed consecutive cycles
Not possible
Lubrification
C and D, or E
Weight of electroreducer
Working Temperature
C and D, or E
Protection IP
C and D, or E
ASSEMBLING RAPID S
After you have cemented in the base plate where you want it, mount RAPID S
using the nuts provided and a no. 19 hexagonal wrench.
25
Measurements
in mm/inch
1
RAPID S
4/157"
m/in
s 3
230V~ 50Hz 230V~ 60Hz
240 285
W
A 1 1,3
10 10
µF
Nm/lbsm 80/176 73/160,5
120V~ 60Hz
186
W
A 2
µF 25
Nm/lbsm 54/119
∞ - 3s/2s
n°
∞ - 3s/2s
n°
n° 1200
100
%
n° 1200
SHELL OMALA S2 G100
62
kg
-10 ÷ +55
°C
IP 54
G
B