GreenWorks Pro MO80L08 Manual Del Operador página 10

EN
1. Pull the height adjustment lever (8) rearward to increase
the cutting height.
2. Pull the height adjustment lever forward to decrease the
cutting height.
7.7 INSTALL THE BATTERY PACK
18 6
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
The machine has an automatic switch function that lets the
other battery work when the first cannot operate.
1. Open the battery door (6).
2. Align the ribs on the battery pack with the grooves in the
battery compartment.
3. Push the battery pack (17) into the battery compartment
until the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
The motor starts only when you put in the safety key (16).
8
16
17
WARNING
NOTE
NOTE
English
7.8 REMOVE THE BATTERY PACK
1. Remove the safety key (16).
2. Open the battery door.
3. Push and hold the battery release button (18).
4. Remove the battery pack from the machine.
8 OPERATION
Wear eye protection during operation.
8.1 START THE MACHINE
2
1. Make sure safety key is inserted into slot.
2. Push and hold the start button (1).
3. While you hold the start button (1), grab the start handles
(2) in the direction of the handle bar.
4. Once the machine has started, you can release the start
button (1).
5. Press the Turbo button (26) to speed up to 4,500 RPM.
Battery capacity indicator (28)
Lights Capacity
4 Green The battery is above 80% capacity
Lights
3 Green The battery is between 80% and 60% ca-
Lights pacity
2 Green The battery is at between 60% and 40% ca-
Lights pacity
1 Green The battery is between 40% and 20% ca-
Light pacity
Lights go out The battery is less than 20% capacity and re-
quires charging immediately
8.2 STOP THE MACHINE
1. Release the start handle to stop the machine.
10
WARNING
28
26
1
TURBO
TURBO