Sol Welding FUTURA Serie Manual De Instrucciones página 17

Instruction Manual / Betriebsanleitung / Livret d'Instructions / Manuale Istruzioni / Manual de instrucciones
ADJUSTMENTS AND FEATURES ON FUTURA SERIES
Refer to Fig. 4.
POS. 27:
POS. 28:
POS. 29:
POS. 30:
POS. 31:
POS. 32:
GB
POS. 33:
POS. 34:
POS. 35:
POS. 36:
POS. 37:
POS. 38:
POS. 39:
POS. 40:
POS. 41:
Alarms:
Machine is capable to reconise 2 different kind of alarms:
- Over heating alarm, will be visualised on the digital display as "ALL HFA".
- Water cooling failure, will be visualised on the digital display as "ALL CFA".
In presence of one of these alarms, it is not possible to weld.
-Over heating alarm will disapear soon as the temperature of the machine drops into its stan-
dards limits.
-Water cooling failure will disappear soon as the water level is back to its standards, and the
machine gets turned off and on again.
Size Display REAL CURRENT and WIRE SPEED (m/min).
WIRE SPEED LED. If it flickers, regulate it using knob (41).
Size Display:
BBT time (Burn Back Time) (See
SOFT START (See Page
TIMER (See Page 31)
LED Preset BBT time (Burn Back Time). If it flickers, regulate it using push
button "+" "-" (34).
LED Preset SOFT START. If it flickers, regulate it using push button "+" "-" (34).
LED Preset TIMER. If it flickers, regulate it using push button "+" "-" (34).
Push button to select BBT, SOFT START,TIMER.
Push button for regulation BBT, SOFT START,TIMER.
LED TIMER on.
LED 4 times on.
LED 2 time on.
Test gas push button.
Inch wire push button.
Push button for selection 2T, 4T,TIMER cycle.
WIRE SPEED regulation knob.
Page 32)
33)
FUTURA SERIES
17