cecotec CONGA 890/SLIM Manual De Instrucciones página 26

ENGLISH
TIP: if there are particles on the charging terminals the charging base, please clean them as soon
as possible.
BATTERIES REPLACEMENT
Use exclusively original Cecotec batteries.
• The battery can be removed by the customer and, if necessary, replaced. Advice on the proper
disposal of the battery can be found directly on the battery.
• The replacement method is shown below.
6. TROUBLESHOOTING
WARNING CODES
Any errors that could appear during the cleaning process can be identified by the robot's number
of beeps and light flashes. Relevant details are listed below.
RED LIGHT BLINKS:
Nº Beeps
01
02
03
26 CONGA 890 SLIM
05137_Conga Slim 890_Manual_PE/LI.indd 26
Error
Bumper error.
Free-fall sensors error.
Other errors.
Solution
Check if the bumper is stuck with
due to dust.
The free-fall sensors are dirty,
please clean them.
Voltage is too low and artificial
assistance is needed, or the power
switch is off while charging.
31/5/18 11:25