Descargar Imprimir esta página

Snap-On EEWB332B Manual De Operador página 29

Publicidad

Idiomas disponibles

Idiomas disponibles

1
2
3
4
Figure 32
Figure 34
Figure 37
Readjust the tire on the rim so that the reference
mark made is aligned with the valve (use tire
changer).
Clamp the wheel on the balancer and readjust it until
the valve is exactly perpendicular to and above the
main shaft.
Press the ENTER key
position.
The OP.6 reading appears
Spin the wheel (START).
5
After the measuring run four readings are possible:
II - OP.7
Proceed with the OP program. It is recommended that
the tire be turned over on the rim.
OP.7 - II
Proceed with the OP program. It is recommended to
shift the tire on the rim (manual rotation).
H0
Optimum condition has been achieved and cannot be
improved.
H2
Silent running cannot be improved.
• Press STOP (5) to exit.
EEWB332B
(1)
to acquire the valve
(Fig.
34).
29

Publicidad

loading