Setting The Clock And Timer; Timer Touch Control - Fulgor Milano PRO-RANGE 30 Serie Manual De Uso

7 - Setting the Clock and Timer

EN

Timer Touch Control

Setting the clock
"Auto" and "0:00" will start flashing when the unit is switched
on for the first time. To set the clock, press the central button for
about 3 seconds. When
the correct time.
Note: only 12 hrs setting available.
Wait until a beep tells you that the clock has been set.
To set the time at a later stage, press
seconds and then adjust the clock as described above.
Minute counter
As this minute counter does not control the oven, when it
finishes counting the oven will continue to work.
To set, press the central button for 3 seconds until
Press + and to set the required time.
-
To set the minute counter at a later stage, press the central
button for 3 seconds and adjust as described above.
The minute counter beeps when it finishes counting.
To disable it, press any button.
The minute minder can be set to a maximum time of 23 hours
and 59 minutes.
12
appears, press + or to set
-
+
and - together for 3
appears.
Adjusting beep volume
To adjust beep volume, press
Then press the central button and wait for "ton1 " (high volume)
to flash. Press - to select 'ton2" (medium volume) or "ton3"
(low volume).
Press the central button to set the selected volume.
+
and - together.