Setting The Clock - Fulgor Milano CO 4512 TC Instrucciones Para El Usuario

In this mode, the oven is never REALLY turned on, i.e., the heating elements are never powered!
The control panel is INACTIVE and, so, the oven will not respond to commands!

Setting the clock

The oven will signal that it is connected to the power mains with a double beep.
To set the system time, press the "TIMER FUNCTIONS" button
Each command activated is confirmed by a beep.
To disable the demonstration mode, touch the light
symbol for five seconds:
normal operation and ready for turning on.
Now you can set the time but it is not necessary for
turning on the oven.
for at least 3 seconds
Set the clock with the + and - buttons: during
setting the separator dots flash, the time has been
set when the dots remain steady on.
41 41
the control will go to
GB GB