Disconnecting the device
Set the main switch to "0" position.
Remove the plug from the
power outlet.
Shut off the water supply.
Operate the manual spray gun until
there is no pressure left in the device.
Engage the manual spray gun's safety
catch to secure the gun against
unintentional triggering.
Storing the device
Insert the manual spray gun on
the support.
Wind the high-pressure hose and hang
it on the hose storage.
Wind the power cord around
the support.
Secure the plug with the mounted clip.
Frost protection
Warning
Ice will damage the device if all water has
not been completely drained.
Place the machine in a location protected
from frost.
If storage free of frost is not possible:
Allow water to drain.
Pump ordinary market antifreeze into
the device.
Note
Use ordinary glycol-based
automotive antifreeze.
Observe the antifreeze manufacturer's
usage instructions.
Let the machine run for no more than
1 minute until the pump and conduits
are empty.
Transport
Danger
Risk of injury and damage! Observe the
machine's weight for transport.
To move the device long distances,
pull it by the handle.
Place the push bar downward to
transport devices without hose reel.
To transport the device, grab it by the
handle and not by the push bar.
When transporting in vehicles, secure
the device to keep it from slipping and
tipping over in accordance with the
applicable guidelines.
Danger
Risk of injury and damage! Observe the
machine's weight for storage.
Care and maintenance
Danger
Danger of injury caused by a device
starting up inadvertently and
electric shock.
Before carrying out any work on the
device, disconnect it from the mains.
Note
Used oil may only be disposed of at
designated collection points. Deliver used
oil there. Contaminating the environment
with used oil is illegal.
Safety inspection/maintenance
Arrange for a regular safety inspection
with your dealer or contract a
maintenance agreement. Request
assistance in a timely manner.
16
Storage
agreement