Weidmuller THM MultiMark Plus Manual Del Usuario página 48

Loading Material
4 Loading Material
For adjustments and simple installation work, use the accompanying Allen key located in the top
section of the print unit. No other tools are required for the work described here.
4.1 Loading Media from Roll
4.1.1 Positioning the Media Roll on the Roll Retainer
Figure 10 Loading Media from Roll
f Open cover.
f Turn ring (2) counterclockwise, so that the arrow points to the symbol
stop (1).
f Remove the margin stop (1) from the roll retainer (4).
f Load label roll (3) on the roll retainer in such a way that the labels can be inserted into the printhead in the
right position. The printing side of the labels must be visible from above.
f Re-mount the margin stop (1) onto the roll retainer (4). Push the margin stop (1) to the roll (3) until the roll
touches both margin stops and a clear resistance is encountered.
48
1
2
3
4
, and thus release the margin
2599440000/00/04.2019