Bosch Purion 200 Instrucciones De Servicio Originales página 15

Begin Bluetooth® pairing by pressing and holding (> 3 s) the
on/off button (1). When the status of the pairing process is
displayed, release the on/off button (1).
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register and
log into the eBike Flow app.
To record activities, you must consent to the storage of your
location data in the app. Without this, your activities cannot
be recorded in the app. For location data to be recorded,
you must be logged in as the user.
eBike Lock
The <eBike Lock> can be activated for each user via
the eBike Flow app. In the process, a key for unlocking the
eBike is saved on the smartphone.
The <eBike Lock> is automatically enabled in the following
cases:
– The eBike is switched off via the operating unit
– The eBike is switched off automatically
If the eBike is switched on and the smartphone is connected
to the eBike via Bluetooth®, the eBike will be unlocked.
<eBike Lock> is linked to your user account.
If you lose your smartphone, you can log in to your user ac-
count on the eBike Flow app using another smartphone and
unlock then the eBike.
Warning! If you select a setting in the app that could have
negative consequences in combination with the <eBike
Lock> (e.g. deleting your eBike or user account), you will be
shown warning messages beforehand. Please read through
these thoroughly and adhere to the warnings that are is-
sued (e.g. before deleting your eBike or user account).
Setting Up the <eBike Lock>
In order to be able to set up the <eBike Lock>, the following
conditions must be fulfilled:
– The eBike Flow app is installed.
– A user account has been created.
– The eBike is not currently updating.
– The eBike is connected to the smartphone via Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike battery is sufficiently charged and the charging
cable is not connected.
You can set up the <eBike Lock> in the eBike Flow app in
the <Settings> menu item.
From now on, you can deactivate the assistance from your
drive unit by switching on <eBike Lock> in the eBike
Flow app. This deactivation can only be overridden if your
smartphone is in the vicinity of the eBike when the eBike is
switched on. To do this, your smartphone must have
Bluetooth® switched on and the eBike Flow app must be
active in the background. The eBike Flow app does not need
to be open. When the <eBike Lock> is activated, you can
continue to use your eBike without assistance from the drive
unit.
Bosch eBike Systems
Compatibility
The <eBike Lock> is compatible with these Bosch eBike
product lines from the system generation the smart system:
Drive unit
BDU374x
BDU33xx
BDU31xx
How it Works
In combination with the <eBike Lock>, the smartphone
functions similarly to a key for the drive unit. The <eBike
Lock> is activated by switching off the eBike. As long as
the <eBike Lock> is active after the function is switched on,
this will be indicated by a padlock symbol on
the Purion 200 operating unit.
Note: The <eBike Lock> alone does not provide adequate
theft protection; it is simply a supplement to a mechanical
lock! The <eBike Lock> does not provide any form of mech-
anical lock for the eBike. Only the assistance from the drive
unit is deactivated. The drive unit will be unlocked for as long
as the smartphone is connected to the eBike via Bluetooth®.
If you wish to give other users temporary or permanent
access to your eBike or you want to take your eBike to a
service, you will need to deactivate the <eBike Lock> in
the eBike Flow app in the <Settings> menu item. If you
wish to sell your eBike, you will also need to delete the eBike
from your user account in the eBike Flow app in the <Set-
tings> menu item.
When the eBike is switched off, the drive unit will emit a
"Lock" sound (i.e. an audio signal that is played once) to in-
dicate that the assistance from the drive unit is switched off.
Note: The audio signal will only be played if the eBike is
switched on.
When the eBike is switched on, the drive unit will emit two
"Unlock" sounds (i.e. an audio signal that is played twice) to
indicate that the assistance from the drive unit is enabled
again.
The "Lock" sound will help you determine whether or not
the <eBike Lock> on your eBike is active. The audio signal is
activated by default, but it can be deactivated in the eBike
Flow app in the <Settings> menu item by selecting the lock
symbol under your eBike.
Note: If you can no longer set up or switch off the <eBike
Lock>, please contact your bicycle dealer.
Replacing eBike Components and the <eBike Lock>
Replacing the Smartphone
1. Install the eBike Flow app on the new smartphone.
2. Log in with the same account that was used to activate
the <eBike Lock>.
3. The <eBike Lock> is displayed as set up in the eBike
Flow app.
Replacing the Drive Unit
1. The <eBike Lock> is displayed as deactivated in
the eBike Flow app.
English – 5
Product line
Performance Line CX
Performance Line
Active Line
Active Line Plus
Performance Line SX
0 275 007 3RP | (28.02.2023)