Publicidad
Load securing
G
WARNING
The handling characteristics of a laden vehicle are dependent on the
distribution of the vehicle's load. Make sure that:
the maximum load of the roof box is never exceeded, even if the
•
permissible roof load has not yet been reached
the load is evenly distributed, and the load's centre of gravity is
•
as low as possible
pointed or sharp-edged objects are carefully padded to protect
•
the tensioning straps and the roof box
the load is secured with all tensioning straps and cannot slip
•
during the journey
The load could otherwise come loose during your journey, e. g. when
you brake, and damage the roof box.
1. Pull tensioning straps (2) through eyelets (8).
2. Load roof box (1).
3. Place tensioning straps (2) over the load, route through clasp (9) and
pull tight.
4. Check that the load is secure and re-tighten tensioning straps (2) as
required.
9
2
8
Closing the roof box
The key (3) can be removed only when roof box (1) is closed and the key
is in the vertical position.
Pull down the lid of roof box (1) by the handle until it engages audibly and
secure with key (3).
Removal
Removal should be carried out with the help of a second person.
To remove the roof box, follow the same sequence in reverse.
- 8 -
1
3
M+P-03F-10018
Publicidad
