cecotec BOLERO 10500 INVERTER A Manual De Instrucciones página 62

ENGLISH
Please note
- If the hose leaks after connection, repeat the process.
- Do not bend the hose.
- Check the inlet hose connection before every use.
Connecting the drain hose
- The drain hose should be placed at a height of 65-100 cm above the ground, otherwise it
may cause poor drainage. Fig. 12
- You can use the drain-hose bracket supplied to connect the drain hose to the wall, drain
pipe, or sink. Fig. 13
- Make sure that all hose connections are tight.
Please note
Do not immerse the end of the drain hose in water for the washing machine to work properly.
Electric connection
- Since the maximum current flow is 10 A when the interior temperature of the washing
machine increases, make sure that the power supply system (current, supply voltage, and
cord) in your home can meet the normal load requirements of electrical appliances.
- Connect the appliance to a properly installed and earthed outlet.
- Make sure that the household supply voltage matches the rated voltage of the washing
machine.
- Make sure the power plug matches the socket.
- Do not use multipurpose plugs, sockets, or extension cords.
- Do not connect or disconnect the plug with wet hands.
- When disconnecting the plug, hold it firmly and pull it out. Do not pull the power cord out
abruptly.
Warning
The washing machine must be properly earthed. If a short circuit occurs, earthing can
1.
reduce the risk of electric shock.
The washing machine must be operated on a circuit separate from other electrical
2.
appliances. Otherwise, the surge protector may trip, or the fuse may blow.
Washing machine operation
Please note
Make sure that the washing machine is properly installed before use.
Before first use, you should perform a complete washing cycle without laundry.
B OL E RO D RE SS CO D E 10 5 0 0 I N V E RTE R A
62
B OL E RO D RE SS CO D E 10 5 0 0 I N V E RTE R STEEL A