cecotec BOLERO 10500 INVERTER A Manual De Instrucciones página 69

Control panel
Selection Turn the knob to select a washing programme.
knob
The display shows the current programme information and estimated time
Display
remaining, or an information code when a fault occurs.
Press this button to change the washing-programme water temperature.
Temperature The available temperature range varies from programme to programme.
The selected temperature will be shown on the display.
Press this button to change the spin speed of the programme. The
Speed available spin-speed options depend on the programme.
The selected spin speed will be shown on the display.
Press this button repeatedly to cycle through the available options (from 3
Delay Start
to 24 hours in one hour increments).
Press this button to start or stop the washing process:
Press the button once to start the washing programme.
Start/Pause
To stop the programme, press the button again.
To resume the programme, press the button again.
Press this button to switch the washing machine on or off.
Power If you switch on the machine and do not press any button within 10
minutes, the machine will switch off automatically.
Delay Start
You can set the washing machine to automatically end washing at a specific time by choosing
a delay between 3 and 24 hours (in 1 hour increments).
Choose the desired programme and change the cycle settings if necessary.
1.
2. Press the Delay Start button repeatedly until the desired end time is set.
Press the Start/Pause button.
3.
4. To disable the Delay Start feature, restart the washing machine by pressing the Power
button.
Example:
- Current time: 2:00 p.m.
- Desired starting time: 5:00 p.m.
Select the washing programme.
1.
2. Select the "Delay Start" function and set 3 hours by pressing the Delay Start button.
Press the Start/Pause button.
3.
The washing machine will start operating at 5:00 p.m.
BOLE R O D R E S S CO D E 1 0 5 0 0 I N V ERTER A
BOL E RO D R ES S COD E 1 0 5 0 0 I N V ERTER S TE EL A
ENGLISH
69