Descargar Imprimir esta página

Dreame DreameBot D10s Pro Manual Del Usuario página 9

Ocultar thumbs Ver también para DreameBot D10s Pro:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
How to Use
EN
7. Scheduled Cleaning
You can schedule cleaning time in the Dreamehome app. The robot
will automatically start cleaning at the designated time and then
return to the charging dock to recharge when the cleaning is done.
8. Additional App Functions
Follow the instructions on the app interface to use more functions.
The version of the app might have been updated; please follow
the instructions based on the current app version.
9. Use the Mopping Function
It is recommended that all floors are vacuumed at least three
times before the first mopping session to achieve a better cleaning
effect.
1) Dampen the mop pad and wring out excess water. Install the
mop pad as shown in the diagram.
12
2) Fill the tank with water.
Note:
· Do not use detergent or disinfectant.
· Do not fill with hot water, which may cause distortion of the water tank.
3) Align the mopping module as indicated by the arrow, then
slide it into the back of the robot until it clicks into place. Press the
button
or use the Dreamehome app to start cleaning.
Click
Click
Note:
· It is not recommended to use the mopping function on carpets.
· Use the app to adjust the water flow as required.
Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the
following table for routine maintenance.
Maintenance
Part
Replacement Period
Frequency
Mop pad
After each use
Every 3 to 6 months
Main brush
Every 6 to 12 months
Dust bin filter
Once every 2 weeks
Every 3 to 6 months
Side brush
Charging dock's
signaling area
Charging contacts
Universal wheel
/
Once every month
Laser Distance
Sensor (LDS)
AI visual sensor
Cliff sensors
Water tank
Clean it as needed
/
Dust bin
Note: The replacement frequency will depend on your usage of the robot. If an exception
occurs due to special circumstances, the parts should be replaced.
Clean the Dust Bin and Filter
1. Open the robot cover and press the bin clip to remove the dust bin.
2. Open the bin cover and empty the bin as shown in the diagram.
EN
13

Publicidad

loading