Sears Kenmore 385.19030 Manual De Instrucciones página 72

Zipper Sewing
Choose Stitch Pattern 01 and attach Foot E.
C) Selected stitch
(_) E: Zipper foot
• To Snap On the Zipper Foot
Fit the pin on the zipper foot into the groove on the
foot holder,.
'_"To sew the left side of the zipper, attach the
zipper foot on the right-hand side.
'_' To sew the right side of the zipper, attach the
zipper foot on the left-hand side.
(D Groove _ When the left side is sewn°
(_) Pin (_) When the right side is sewn,
• Fabric Preparation
Add 1 cm (1/2") to the zipper size. This is the overall
opening size,
(_) Right side of fabric
(_ Opening size
(_) Zipper size
(_ 1 cm(1/2")
(_) End of opening
(_) Slider
0 Zipper teeth
(_) Zipper tape
Place right sides of fabric together and sew to the
end of the zipper opening_ Reverse stitch to lock the
stitches, Manually increase the stitch length to 4.5
and set the needle tension at 0, and sew the zipper
opening
(_) 4_5(Basting Stitch)
(_ End of opening
@ Reverse stitch
1@Straight stitch
10 2 cm (3/4")
• To Sew
[] Fold back the left seam allowance. Turn under
the right seam allowance to form a 0.2 to 0.3 cm
(1/8") fold. Place the zipper teeth next to this fold
and pin in place.
Attach the zipper foot with the pin of the foot on
the righthand side.
Lower the zipper foot on the top side at the
bottom of the zipper so that the needle pierces
the fabric next to the fold and the zipper tape.
(!) Fold (_) Opening size
(_) 0°3 cm (1/8") 0 Lower fabric
(_) Stitch line (Z) Wrong side of fabric
0 End of opening
k
f
64
01
I
!
d)
J
¢
®-1
I
®i
®
J