Bobbin Winding - Sears Kenmore 385.19030 Manual De Instrucciones

Troubleshooting, cont'd
Cause Reference
1+ The machine is not plugged in+ Page 8
2. A thread is caught in the hook race+ Page 84
3o The bobbin winder spindle is stilt in the winding
position+ Page 16
1. The stitch is not balanced. Page 80
1. The stitch density is not suitable for the fabric being
sewn. Page 56
2, Interfacing is not being used with stretch fabricso Page 52
Condition
The machine
doesn't work.
Patterns are dis-
torted,
The automatic
buttonhole
stitches are not
working,
Noisy operation 1
2.
3o
Machine stalls and 1+
the message 2o
"STOP FOR SAFETY 3,
PURPOSES"
appears on the
screen.
There is thread caught in the hook race
Lint has built up in the bobbin holder or hook race+
Slight humming sound coming from internal motor.
Lint has built up in the hook race.
Needle or.bobbin thread is not correctly threaded.,
The fabric is too thick.
Page 84
Page 84
Normal
Page 84
Pages 18, 20
Page 42
When Message Appears on the Screen
The liquid crystal display shows" BOBBIN WINDING ". (
After the bobbin is wound, return the bobbin winder
to its original position by moving the spindle to the
left.
The message" STOP FOR SAFETY PURPOSES ...... "
scrolls on the screen when the machine is over-
loaded.
Stop operating the machine until this message
disappears (about 15 seconds),
BOBBIN WINDING
II STOP FOR SAFETY 1)
STOP FOR SAFETY PURPOSES......
J
87