3. Pass the power supply wires (black and white) and the earth wire (green or yellow) through wiring
through-hole 1. (Refer to Figure 9.)
(1) Turn the streamer air purifier unit over.
(2) Pass the power supply wires (black and white) and the earth wire (green or yellow) through wiring
through-hole 1.
(3) Push the power supply wires (black and white) and the earth wire (green or yellow) into the
UV streamer air purifier unit.
(This is to prevent the power supply wires (black and white) and the earth wire (green or yellow)
from getting caught between the UV streamer air purifier unit and the indoor unit.)
Power supply wires
9
01_EN_3P701968-3.indd 9
01_EN_3P701968-3.indd 9
Figure 5
Signal wire
Tape
Pleated filter (1)
(Accessory)
Remove the tape (5 locations).
Figure 7
Figure 6
Tape
Hook (Filter) 2 locations
Hold this part.
Figure 8
English
12/05/2023 15:12:27
12/05/2023 15:12:27