Canon SPEEDLITE 600EX-RT Manual De Instrucciones página 101

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
C.Fn-12:
0: 1 (External & internal power)
Charges in parallel using both internal power and external power.
1: 2 (External power only)
Internal power is needed to control the Speedlite. By using only external
power for charging, you can minimize the depletion of the internal power.
6
C.Fn-13:
0: 4 (Speedlite button and dial)
1: 5 (Speedlite dial only)
You can perform flash exposure compensation by directly turning <9>,
without pressing the <@> button.
7
C.Fn-20:
(Beep)
You can enable a beep to sound when the Speedlite is fully charged, or
when a slave unit is fully charged during radio wireless transmission flash
shooting.
Note that when set to 1, a beep will sound as a warning when the flash
firing restriction is activated due to a temperature increase in the flash
head.
0: OFF (Disabled)
1: ON (Enabled)
(Flash recycle with external power)
(Flash exposure metering setting)
C: Setting Custom Functions
99

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Speedlite 600ex

Tabla de contenido