Getting Started And Basic Operations - Canon SPEEDLITE 600EX-RT Manual De Instrucciones

Getting Started and
This chapter describes the preparations before starting
flash shooting and the basic shooting operations.
Cautions for firing continuous flashes
To avoid degrading and damaging the flash head
due to overheating, do not fire more than 20
continuous flashes. After 20 continuous flashes,
allow a rest time of at least 10 min.
If you fire more than 20 continuous flashes, and
then fire the flash again repeatedly in short
intervals, the safety function may activate and
restrict flash firing. While flash firing is restricted,
the recycling time is automatically set to an interval
between approx. 8 and 20 sec. If this happens,
allow a rest time of at least 15 min.
For details, see "Flash Firing Restriction due to
Temperature Increase" on page 106.
Basic Operations
1
13