1.
INSTRUCTIONS FOR PACKAGE AND STORING
1.1
DISPOSAL
2.
TECHNICAL FEATURES
3.
SAFETY
3.1
SAFETY MARKING
4.
SUPPLIED ACCESSORIES
5.
PUSHBUTTONS AND DISPLAY ON THE CONTROL PANEL
6.
REPLACING THE PRINTER ROLL
7.
INSTALLATION
8.
INTRODUCTION FOR STERILISATION
9.
STERILISATION TABLE
10.
FILLING OF THE WATER TANK
10.1
CHARACTERISSTICS OF THE WATER TO BE USED
11.
MANUAL FILLING OF THE WATER TANK
12.
EMPTYING THE TANK
13.
COMMISSIONING AND PREPARING THE STERILISATION
14.
NIGHT CYCLE
15.
MAINTENANCE
15.1
DAILY ROUTINE MAINTENANCE
15.2
WEEKLY ROUTINE MAINTENANCE
15.3
QUATERLY MAINTENANCE
16.
SETTING THE DATE AND TIME
17.
MESSAGES OF THE ALARM AND ERROR DISPLAYS
17.1
ASSISTANCE
TECNO-GAZ RESERVE THE RIGHT TO CARRY OUT IMPROVING TECHNICAL CHANGES
WITHOUT ANY PREVIOUS NOTICE. THIS MANUAL IS A SOLE PROPERTY OF TECNO-GAZ
s.p.a. AND CANNOT BE COPIED, REPRODUCED OR TRANSFERRED TO THIRD PARTIES
WITHOUT THE WRITTEN AUTHORISATION OF TECNO-GAZ s.p.a.
.
INDEX
ENGLISH
1