WEG CFW500 Manual Del Usuario página 3

Summary of Reviews
The information below describes the reviews made in this manual.
Version Review
- R00
- R01
- R02
- R03
- R04
- R05
- R06
NOTE!
The inverters CFW500 have the default parameters set as described below:
60 Hz for models without internal filter.
„
50 HZ for models with internal filter (check the smart code
„
E.g.: CFW500A04P3S2NB20C2).
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the default frequency
(check P0403), it is necessary to set:
P0204 = 5 for 60 Hz.
„
P0204 = 6 for 50 Hz.
„
It is only necessary to set these parameters once.
Refer to the programming manual of the CFW500 for further details about the
setting of parameter P0204.
First edition
General review and inclusion of the new models
Modification in Table B.3 on page 151
General review and inclusion of frame D
General review
General review and inclusion of frame C 500 / 600 V
General review and inclusion of frame E
Description
and in the printing of the filter switch