Startup; Startup Menu; V/F Control Type (P0202 = 0) - WEG CFW500 Manual Del Usuario

Powering up and Startup

5.2 STARTUP

The startup is explained in a very simple way, using the programming features with the existing
parameter groups in the menus STARTUP and BASIC.

5.2.1 STARTUP Menu

5.2.1.1 V/f Control Type (P0202 = 0)

Seq Indication on the Display/Action
1
Monitoring mode
„
Press the key ENTER/MENU to enter 1
„
level of programming mode
3
When the STARTUP group is selected
„
Press the key ENTER/MENU
5
When the desired value is reached, press
„
ENTER/MENU to save the modification
Press the key
„
7
If necessary, modify the content of "P0402
„
- Motor Rated Speed"
Press the key
„
9
To end the Start-up routine, press the key
„
BACK/ESC
To return to the monitoring mode, press the
„
key BACK/ESC again
Figure 5.2: Sequence of the startup group for V/f control
30 | CFW500
Seq
st
for the next parameter
for the next parameter
Indication on the Display/Action
2
The PARAM group is selected, press
„
the keys or
STARTUP group
4
If necessary, press ENTER/MENU to
„
modify the content of "P0202 - Control
Type" for P0202 = 0 (V/f)
6
If necessary, modify the content of "P0401
„
- Motor Rated Current"
Press the key
„
8
If necessary, modify the content of "P0403
„
- Motor Rated Frequency"
Press the key
„
until selecting the
for the next parameter
for the next parameter