Bosch CTL9 Serie Manual Del Usuario página 55

Open the Home Connect app and
1.
scan the following QR code.
Follow the instructions in the
2.
Home Connect app.
Overview of the Home Connect settings
You can find an overview of the Home Connect settings and network settings
here.
Basic setting
Home Connect
assistant
WiFi
Remote start
Software update
Note: When "WiFi" and remote start
are switched on,
display.
13.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
Selection
Start
Disconnect
On
Off
On
Off
-
appears on the
13.3 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected
to your home network.
Description
Add mobile device.
Disconnect appliance from network.
Switch off the wireless module during
long absences or to save energy.
Note: In networked standby mode
your appliance requires max. 2 W.
Switch remote start on the appliance
on and off.
Note: With the Home Connect app
only switch-off is possible.
Note: This setting is only available
with a software update.
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
Home Connect en
55