Safety In Preparation - JF 1000 AT Manual De Instrucciones

SAFETY IN PREPARATION

ƒ Make sure that the machine is
correctly engaged to the tractor
and the locking pin properly
locked.
ƒ Before starting the operation,
perform a general check on the
machine, noting that there are
no loose screws, worn parts,
cracks, leaks, loose chains. Make
the necessary repairs, always
observing the maintenance
instructions of this manual.
ƒ When disengaging the machine
from the tractor, choose a flat
location, facilitating the procedure
and subsequent engagement.
Also check that the machine is
still, if necessary, lock the wheels.
ƒ Be particularly careful when
coupling and uncoupling the
machine to the tractor. Make sure
that the locking pins are tightly
locked. Always use counter-pins
to prevent pins from accidentally
loosening.
ƒ In order to provide better insight,
certain images or illustrations in
this manual may show removed
safety protection. However, the
machine can never be used in
this condition. Before starting the
machine, check that all guards
have been fitted.
ƒ Secure the ends of the cardan
guards at fixed points on the
tractor and implement through
the specified chains for this
purpose, so that they remain
static, without turning. Never use cardans without
safety protection.
JF 1000-AT
7