Assembly The Vanes On The Feeding Drums - JF 1000 AT Manual De Instrucciones

A
Carriage bolt 3/8" x 1" (18 un)
Hex nut 3/8" with nylon lock (18un)
24
Operation Technical Manual
ASSEMBLY THE VANES ON THE
FEEDING DRUMS
Assemble the 6 vanes (A) provided with the head
on the feeding drums of the harvester (they are 3
on each roll).
The 6 vanes (A) are identical. Refer to the above
figures for the correct mounting position on both
feeding drums.
Fit the vanes into the holes in
the combs of the two feeding
drums..
A