Transport Safety; Seguridad Personal - JF 1000 AT Manual De Instrucciones

TRANSPORT SAFETY

ƒ The transport of the machine
coupled to the tractor must not
be carried out on public roads and
motorways. This practice should
be limited to within rural properties
and areas. Consult your transit
authority about the rules and
laws in force in your area as to
whether or not to transport the
machine with the tractor on certain
stretches of road. Ask for written
directions, authorizations and
procedures.
ƒ Keep an eye on the height of
transport, especially on viaducts.
ƒ Do not exceed a safe transport
speed. Slow down and be
cautious on bumpy terrain and
on bends. Always move the tractor
at speeds compatible with terrain
or road conditions.
ƒ Never allow people to be present
on any part of the machine during
transport.
ƒ When transporting the machine,
take special care with the electrical
network, risk of shock on contact
with the electrical wiring. Stay
away from high voltage overhead
lines. Risk of electrocution (death
caused by electric power).
ƒ Do not drink and drive.
10
Operation Technical Manual

SEGURIDAD PERSONAL

ƒ The safety of the operator and others is
ƒ a major concern in the design and development
of a machine. However, many accidents occur
every year that could have been avoided, in
general, due to lack of attention and observation
of the safety rules during the operation. Please
read this manual carefully and be alert all the
time.
ƒ Never use alcohol or drugs that could impair
alertness or coordination when operating this
equipment.
ƒ Wear personal protective equipment - PPE
ƒ when operate the machine. Prolonged exposure
to noise can cause damage or hearing loss.
ƒ Dress appropriately to operate the machine. Hold
long hair and do not wear overly wide clothing.
Remove rings, chains and other elements that
may be attached to moving parts or mechanisms.
ƒ Keep hands away from moving parts.
ƒ Do not approach or allow other people to
approach the drums while the machine is on.
ƒ Never attempt to clean or unclog any part of the
machine while it is turned on. This procedure
can only be carried out with the power take-off
switched off, the key removed from the tractor's
ignition and the machine without any movement.
ƒ Never place your hands inside the grinder while
the machine is on.