Clearance Opening - JF 1000 AT Manual De Instrucciones

clearance
RIGHT
USE A JF CHOPPER ALWAYS WHAT
YOU NEED TO FEED WITH YOUR
HANDS.
WRONG
NEVER ATTEMPT TO FEED THE
HARVESTER WITH HANDS.

CLEARANCE OPENING

It is very important to plan the clearance in advance,
including the openings required for the harvester
and tractor to enter the harvest area.
MINIMAL CLEARANCE WIDTH:
2.50 meters (this measurement may vary according
to the width of the tractor and the tires used).
We remind you that the harvester coupled with a
JF 1000-AT Head has not been developed and is
not suitable for manual feeding since this procedure
exposes the people involved to the risk of a serious
accident.
When it is necessary to manually open the
clearance, use one of the JF stationary line chopper,
such as the JF 60 Maxxium.
ATTENTION:
Clearance planning is the sole responsibility of the
producer (customer).
JF Máquinas is not responsible for the improper
use of the equipment. The harvester coupled
with the JF1000-AT Head should only be used
as described in this manual, any other procedure
should be avoided. For use in other crops, consult
JF Máquinas.
JF 1000-AT
11