Dometic CRX1065 Instrucciones De Montaje Y De Uso página 20

Installing and connecting the refrigerator
7 Installing and connecting the
refrigerator
7.1 Safety instructions for installation on boats
Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the voltage
supply has a residual current circuit breaker.
A
NOTICE!
 The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account
of this. If you have any questions regarding installation, consult
your specialist dealer.
 Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 8, page 6).
 The appliance is designed for ambient temperatures between
+16 °C and +43 °C.
7.2 Installing the refrigerator
Observe the following when installing the refrigerator:
 Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 8, page 6).
Key for fig. 8, page 6
No. Explanation
1 Cold intake air
2 Hot waste air
3 Condenser
4 Spacing above the refrigerator if there is not sufficient air to circu-
late above or at the side.
 Keep objects clear of openings in the housing or installation structure
(such as ventilation slots, etc.).
20
CRX1050 – CRX1140
EN