N-Com R Serie Manual De Instrucciones página 53

3.5. Removing the B602 system from the helmet
Fig. 30
FOR N87, N80-8, N100-5 HELMENTS ONLY – removing the keypad
Remove the keypad from the shell, as indicated in Fig. 31.
•
Rotate the keypad in a counterclockwise direction (Fig. 32).
•
Remove the cheek padding and the shell gasket.
•
Fig. 31
Fig. 33
Fig. 34
Proceed as follows to remove the B602 system
from the helmet:
• Remove the cheek padding and the shell
gasket.
• Remove the keypad from the shell, as shown
in Fig. 30.
Fig. 32
Unhook the right and left clips from the
•
shell, levering upward using a flat head
screw (or a similar tool), as shown in figure
33.
Completely remove the B602 system from
•
helmet using a flat head screwdriver (or
similar tool) and re-install the cheek
padding and the edge gasket.
15