N-Com R Serie Manual De Instrucciones página 59

7. MOBILE PHONE / MP3 PLAYER PAIRING
Make sure the B602 is turned off.
•
Put the system in "Pairing" mode: press and hold the "n" key for 4 seconds, until the red LED light
•
appears.
In Complete Mode
•
In Simple Mode
: do not press any key.
Activate the search of Bluetooth devices on the mobile phone.
•
Select the N-Com device. If a password is requested, enter 0000 (four zeros).
•
Connection between the two devices is established after a few seconds.
•
N.B.: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two
devices are turned off. As a result it needs to be carried out only once.
NB: if a Bluetooth device has already been stored in the B602 system's memory, any new pairing will
overwrite the previous pairing.
Automatic Connection
Manual Connection
8. SECOND MOBILE PHONE PAIRING
"Second mobile phone"
The
The B602 system can be hooked up to two phones at the same time. The second phone (secondary
device) can receive calls but not make them.
To pair the second Bluetooth phone (secondary device):
Make sure the B602 is turned off.
•
Put the system in "Pairing" mode: press and hold the "n" key for 4 seconds, until the red LED light
•
appears.
Press the ""key until you hear the voice prompt "
•
Activate the search of Bluetooth devices on the mobile phone.
•
Select the N-Com system from the list. If a password is requested, enter the code 0000 (four
•
zeros).
After a few seconds, the connection between the two devices is activated.
•
Once the Bluetooth device has been paired, connection is automatic when the system is turned on.
N.B.: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two
devices are turned off. As a result it needs to be carried out only once.
NB: if a second device has already been stored in the B602 system's memory, any new pairing will
overwrite the previously stored pairing.
: press the "" key until "
Once the Bluetooth device has been paired, connection is automatic
when the system is turned on.
In case connection is not automatically initiated after a few seconds, you
can connect from the Bluetooth device or by pressing and holding the "n"
key for about 2 seconds.
function is available only in Complete Mode.
Phone pairing
" appears.
Second mobile phone pairing
".
21