Cameo CLDS60 Manual De Usuario página 13

1
POWER IN - US & CANADA
( )
*
Permanently mounted cable for the power supply of the headlamp. The spotlight is delivered
without a mains plug. Occupancy:
2 DMX IN / OUT
Cable for controlling the headlamp and for forwarding the control signal. The headlamp is deliver-
ed without plug. DMX IN and DMX OUT are identified by means of labels. Occupancy:
DMX IN / OUT: The shield can be recognised by the fact that the wire braid has been
insulated with the help of a heat-shrinkable sleeve.
3 SAFETY
Safety eyelet for securing the headlamp when mounted overhead.
PRESSURE EQUALISATION ELEMENT
The pressure equalisation element to prevent condensation inside the housing is located in the
rear part of the unit. In order to ensure its proper function, the element must be protected from
contamination.
Power In - US & Canada
Black Phase (L)
Grounding
Green
conductor
Neutral
White
conductor (N)
DMX In
Red
Shielding (shrink tubing
insulation)
White
DMX Out
Red
Shielding (shrink tubing
insulation)
White
DMX +
Shield / GND
DMX -
DMX +
Shield / GND
DMX -
13