Cameo CLDS60 Manual De Usuario página 23

GLARE PROTECTION (Half Anti Glare Shield)
The pre-mounted glare shield can be rotated on the headlamp in 60° steps. To do this, loosen the
six hexagon socket screws (see markings) from the glare shield using a suitable tool, bring the
glare shield into the desired position and screw it back onto the headlamp using the previously
loosened screws.
CARE, MAINTENANCE AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, maintained. The maintenance requirement depends on the intensity of use and
the environment in which it is used.
We generally recommend a visual inspection before each operation. Furthermore, we recommend
carrying out all the applicable maintenance measures specified below once every 500 operating
hours or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may
be limited in the event of defects resulting from inadequate maintenance.
23