Publicidad
Idiomas disponibles
Idiomas disponibles
6585.ENv1_9356690.book Page 29 Wednesday, September 10, 2003 5:00 PM
WRITE DOWN VOICE MAILBOX NUMBER AND PROCESS
1
Write down your voice mailbox number.
2
Call and check your voice mail as you normally would.
3
Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
Important: Be precise; you will need this information in "Setup voice mail
with dialing codes" on page 29.
INSERT DIALING CODES
Press the * key repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Indicates...
*
Bypasses a set of instructions.
p
Pauses for 2.5 seconds before sending any numbers that follow.
w
Waits for you to press the Talk key before sending the numbers or
codes that follow.
SETUP VOICE MAIL WITH DIALING CODES
1
At the start screen, press Contacts > 1-touch dialing, and press Select.
2
Scroll to an empty 1-touch dialing slot and press Assign.
3
Enter your voice mailbox number, including the area code.
4
Refer to dialing codes and enter any codes as necessary using the information
that you wrote down from page 29.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5
Enter any remaining pauses or other information that allows you to listen to
your messages, and press OK.
6
Enter a name (such as Voice Mail) and press OK.
To dial and listen to your voice mail, just press and hold the assigned 1-touch
dialing key at the start screen.
Nokia 6585 User Guide
Messages (Menu 1)
29
Copyright © Nokia 2003
Publicidad
