Nokia 6585 Manual Del Usuario página 56

6585.ENv1_9356690.book Page 50 Wednesday, September 10, 2003 5:00 PM
Enter the lock code and press OK.
2
See "Change the lock code" on page 50 for more information on the lock code.
3 Scroll to one of the following options and press Select:
On power-up turns the phone lock feature on immediately after the phone is
powered up.
On immediately turns on the phone lock feature.
Off immediately turns off the phone lock feature.
If you selected On power-up or On, you must enter your lock code before the
phone will function normally. Once the lock code has been accepted, your phone
functions normally.
Important: Call not allowed is displayed if you attempt to place a call
while phone is locked.
To answer a call with phone lock on, press Answer or the Talk key.
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
following numbers:
• The emergency number programmed into your phone (for example, 911 or
other official emergency number).
• The number stored in the Allowed number when phone locked location.
At the start screen, select Menu > Settings > Security settings > Access
1
codes > Allowed no. when phone locked and press Select.
2 Enter the lock code and press OK. (See "Change the lock code" on page 50.
Enter the phone number or press Find and recall the number from the phone
3
book, and press OK.
CALL THE ALLOWED PHONE NUMBER
At the start screen, press the Up or Down Scroll key.
1
2 Press the Talk key to place the call.
Change the lock code
The default lock code is 1234 or the last four digits of your phone number. If you
enter an incorrect lock code five times in a row, your phone will prompt you for the
security code.
1 At the start screen, select Menu > Settings > Security settings > Access
codes > Change lock code and press Select.
2 Enter the current (or default) lock code and press OK.
3 Enter the new lock code and press OK.
4 Reenter the new lock code for verification and press OK.
50 Copyright © Nokia 2003