6585.ENv1_9356690.book Page 43 Wednesday, September 10, 2003 5:00 PM
Receive data or fax calls
Data or fax calls is a Network Service. See "Network services" on page 3 for
more information.
If your wireless service provider supports this feature, then you can set up the phone
to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
Note: For more information on connectivity, refer to the PC/PDA
Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded
from the Nokia website at http://www.nokia.com/us.
1
At the start screen, select Menu > Settings > Call settings > Data/fax calls >
Incoming data/fax call > Normal, Data calls only, or Fax calls only and
press Select:
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
2
When you are finished receiving the fax or data call, repeat Steps 1 and 2 and
select Normal.
DATA TRANSFER
You can view the transmission speed when sending or receiving data or fax calls.
At the start screen, select Menu > Settings > Call settings > Data/fax calls >
Data rate display > Graphic or Off and press Select.
• PHONE SETTINGS
Set the display language
1
At the start screen, select Menu > Settings > Phone settings > Language
and press Select.
2
Scroll to the language of your choice and press Select.
The language setting affects the time and date formats of the clock, alarm clock,
and calendar.
Use automatic Keyguard
You can set the keypad of your phone to lock automatically after a preset time
delay (from 10 seconds to 60 minutes).
1
At the start screen, select Menu > Settings > Phone settings > Automatic
keyguard > On or Off and press Select.
2
If you selected On, Set delay appears in the display.
Nokia 6585 User Guide
Settings (Menu 4)
43
Copyright © Nokia 2003