6585.ENv1_9356690.book Page 58 Wednesday, September 10, 2003 5:00 PM
14 Voice (Menu 10)
• VOICE DIALING
You can dial up to 10 stored numbers using voice dialing.
Before using voice tags, note that:
•
Voice tags are not language dependent. They are dependent on the speaker's voice.
•
You must say the name exactly as you said it when you recorded it.
•
Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
•
Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first assign a voice tag to the number.
1
At the start screen, use the Scroll down key to enter the contacts list.
2
Highlight the contact you want to assign a voice tag, press Details > Options >
Add voice tag > Start.
3
Speak clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone automatically stops recording and saves and replays the voice tag. The
icon appears next to commands which have voice tags assigned.
If recording is not successful, your phone displays Voice system error. Press
Options > Add voice tag, and repeat Steps 2 and 3.
Dial a number
1
Press and hold Contacts (or Go to).
2
When you hear several beeps and Please speak now appears, release the key.
3
Pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag, Found appears, and the phone automatically
dials the number. If the phone does not locate a number or recognize the voice
tag, No match found appears.
58
Copyright © Nokia 2003