Publicidad
Idiomas disponibles
Idiomas disponibles
CANOPY HOUSING INSTALLATION
1. Remove one of the two shoulder screws in the
hanger bracket (C). Loosen the second
shoulder screw without fully removing it.
Assemble canopy (E) by rotating key slot in
canopy (E) over shoulder screw in hanger
bracket (C). Tighten shoulder screw. Fully
assemble and tighten second shoulder screw
that was previously removed. (Fig. 1)
WARNING
To avoid possible fire or shock, make
sure that the electrical wires are
completely inside the canopy housing
and not pinched between the housing
and the ceiling.
2. Securely attach and tighten the canopy
screw cover (F) over the shoulder screws in
the hanger bracket (C), utilizing the keyslot
twist-lock feature. (Fig. 2)
BLADE INSTALLATION
1. Remove and discard the five rubber motor
stops from each motor by removing the
screws. (Fig. 1)
CAUTION
Do not connect fan blades until the fan is
completely installed. Installing the fan with
blades assembled may result in damage to
the fan blades.
1
2
F
1
A
13
E
Publicidad
