Publicidad
Idiomas disponibles
Idiomas disponibles
HOUSING SWITCH CUP/ADAPTER ASSEMBLY INSTALLATION (Continued)
2. Remove one of the three screws in the support
bracket. Slightly loosen the remaining two
screws. Assemble the switch cup assembly (B)
to the housing support bracket on motor arm
assembly (A) using the two key slots in the
switch cup assembly (B). Replace the third
screw and securely tighten all three screws.
(Fig. 2)
3. Securely attach the 9-pin switch cup connector
to the wiring harness socket within the
switch cup assembly (B). (Fig. 3)
4. Install the housing switch cup cover onto the
housing switch cup (B) with the three screws
removed in step 1 above. (Fig. 4)
2
A
3
4
15
B
B
Publicidad
