Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
•When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish.
•Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
Do not use water when cleaning your ceiling fan. It could damage the motor or the finish
and create the possibility of electrical shock.
RECOMMENDED: Periodically check that the fan motor unit screws, blade screws, support
housing and light kit screws are tight and secure.
•Periodic light dusting of the blades is recommended. A feather duster will work best.
•Avoid using water, cleansers, or harsh rag, which can warp and ruin the finish.
TROUBLESHOOTING
If you have any questions regarding the product, please call customer service at 1-888-567-2055,
8 a.m. - 5 p.m., EST, Monday - Friday.
Do not install or use fan if any part is damaged or missing.
PROBLEM
Fan will not start
1. Fuse or circuit breaker blown.
2. Loose power line connections
to the fan, or loose switch wire
connections in the switch
housing.
3. Loose connection at motor
assembly.
1. Blades not attached to fan.
Fan sounds
noisy
2. Loose screws in motor
housing.
3. Screws securing fan blade
holders to motor hub are loose.
WARNING
WARNING
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Check main and branch circuit fuses or
circuit breakers.
2. Check line wire connections to fan and
switch wire connections in the switch
housings.
WARNING
Make sure main power is turned off!
3. Check that the plug between motor and
support bar assembly is properly connected.
1. Attach blades to fan before operating.
2. Check to make sure all screws in motor
housing are snug (do not overtighten).
3. Check to make sure the
attach the fan blade holders to the motor
hub are tight.
19
screws which
Publicidad
