Publicidad
Idiomas disponibles
Idiomas disponibles
Safety, performance, and dependability have been
given top priority in the design of your band saw.
INTENDED USE
The band saw is intended for straight line cutting, scroll
cutting and circle cutting of wood and wood-made
products.
The product is intended to be used only by adult
operators who have read the instruction manual and
understand the risks and hazards.
The product is to be used in dry conditions, with excellent
ambient lighting and adequate ventilation.
The product is intended for consumer use and should
only be used as described above and is not intended for
any other purpose.
GENERAL SAFETY WARNINGS
WARNING
When using electric tools, basic safety precautions
should always be followed to reduce the risk of fi re,
electric shock and personal injury. Read all these
instructions before attempting to operate this product
and save these instructions.
■
Keep work area clear. Cluttered areas and benches
invite injuries.
■
Consider work area environment. Do not expose
tools to rain. Do not use tools in damp or wet
locations. Keep work area well lit. Do not use tools in
the presence of flammable liquids or gases.
■
Guard against electric shock. Avoid body contact
with earthed or grounded surfaces (e.g., pipes,
radiators, ranges, refrigerators).
■
Keep other persons away. Do not let persons,
especially children, be involved in the work, touch
the tool or the extension cord, and keep them away
from the work area.
■
Store idle tools. When not in use, tools should
be stored in a dry locked-up place, out of reach of
children.
■
Do not force the tool. It will do the job better and
safer at the rate for which it was intended.
■
Use the right tool. Do not force small tools to do
the job of a heavy duty tool. Do not use tools for
purposes not intended, for example, do not use
circular saws to cut tree limbs or logs.
■
Dress properly. Do not wear loose clothing or
jewellery, they can be caught in moving parts.
Non-skid footwear is recommended when working
outdoors. Wear protective hair covering to contain
long hair.
■
Use protective equipment. Use safety glasses.
Use face or dust mask if working operations create
dust.
■
Connect dust extraction equipment. If the tool is
provided for the connection of dust extraction and
collecting equipment, ensure these are connected
and properly used.
■
Do not abuse the cord. Never yank the cord to
disconnect it from the socket. Keep the cord away
from heat, oil and sharp edges.
■
Secure work. Where possible, use clamps or a vice
to hold the work. It is safer than using your hand.
■
Do not overreach. Keep proper footing and balance
at all times.
■
Maintain tools with care. Keep cutting tools sharp
and clean for better and safer performance. Follow
instruction for lubricating and changing accessories.
Inspect tool cords periodically and if damaged, have
them repaired by an authorized service facility.
Inspect extension cords periodically and replace if
damaged. Keep handles dry, clean and free from oil
and grease.
■
Disconnect tools. When not in use, before servicing
and when changing accessories such as blades, bits
and cutters, disconnect tools from the power supply.
■
Remove adjusting keys and wrenches. Form the
habit of checking to see that keys and adjusting
wrenches are removed from the tool before turning
it on.
■
Avoid unintentional starting. Ensure switch is in
"off" position when plugging in.
■
Use outdoor extension leads. When the tool is
used outdoors, use only extension cords intended
for outdoor use and so marked.
■
Stay alert. Watch what you are doing, use common
sense and do not operate the tool when you are
tired.
■
Check damaged parts. Before further use of tool, it
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting and any
other conditions that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service centre
unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorized
service centre. Do not use the tool if the switch does
not turn it on and off.
■
Warning. The use of any accessory or attachment
other than the one recommended in this instruction
manual may present a risk of personal injury.
■
Have your tool repaired by a qualified person.
This electric tool complies with the relevant safety
rules. Repairs should only be carried out by qualified
persons using original spare parts otherwise this
may result in considerable danger to the user.
BAND SAW SAFETY WARNINGS
■
Firmly clamp or bolt the saw to a work bench or
leg stand at approximately hip height.
■
Never operate the saw on the floor.
■
Avoid awkward operations and hand positions
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
11
Publicidad
