Ryobi RBS904 Manual Del Usuario página 14

BLADE GUARD
Protects the operator from coming in contact with the
blade.
BLADE GUIDE ADJUSTMENT KNOB
Use the blade guide adjustment knob to adjust the blade
guide assembly up and down, and to keep the blade
from twisting or breaking. Always lock the blade guide
assembly in place before turning on the band saw.
BLADE GUIDES
Upper and lower blade guides helps keep the blade from
twisting during operation.
DUST EXHAUST PORT
A 53 mm (2-1/8") dust exhaust port makes dustless
cutting possible. Attach a dust bag (not included) or a
shop vac to the dust exhaust port.
COVER LOCKING SCREW
Allows front cover to be opened for making adjustments.
MITRE GAUGE
This gauge aligns the wood for a crosscut. The easy-to-
read indicator shows the exact angle for a mitre cut at
15°, 30°, 45° and 60°.
RAPIDSET™ BLADE TENSION LEVER
Controls blade tension when changing blades and
making adjustments for various sawing applications.
SAW BLADE
Saw comes with a standard 6.35 mm (1/4") blade.
SAW TABLE WITH THROAT PLATE
Your band saw has a saw table with tilt control. The
throat plate, installed in the saw table at the factory,
allows for blade clearance.
SCALE AND SCALE INDICATOR
The scale and scale indicator show the angle or degree
the saw table is tilted for bevel cutting.
TABLE LOCK LEVER
Loosening the table lock lever allows the saw table to be
tilted at diff erent angles. Tightening the table lock lever
locks the saw table in place.
TRACKING KNOB
Adjusts tracking to keep blade centred on the wheels.
TRACKING VIEW WINDOW
The tracking view window makes tracking adjustments
easier to see.
PUSH STICK
Always use the push stick to feed the workpiece until it
is clear of the table.
14
Original Instructions
LOOSE PART LIST
Description
Washers
Table lock lever
Hex key, 3 mm
Hex key, 4 mm
Hex key, 5 mm
Mitre gauge
Acorn nuts
Feet
Saw table
Locking bolts
Hex nuts
Extension support
Rip fence
Push stick
Operator's manual
ASSEMBLY
UNPACKING
This product requires assembly.
■
Carefully lift the saw from the carton and place on a
level work surface.
WARNING
Do not use this product if any parts on the Loose Part
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require
customer installation. Use of a product that may have
been improperly assembled could result in serious
personal injury.
■
Inspect the tool carefully to make sure no
breakage or damage occurred during shipping.
NOTE: This saw has been shipped with no blade
tension. Do not turn this saw on until blade tension
has been properly set.
■
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■
If any parts are damaged or missing, please call your
service centre for assistance.
Quantity
7
1
1
1
1
1
4
4
1
2
2
1
1
1
1