American Standard Aspirations Flash TU061740 Manual De Instrucciones página 4

1
CONVERT BETWEEN 2 AND 3 WAY
• The diverter is configured for the 3-way
option by default.
• To switch to 2-way, pull off 3-way RING (1)
and replace with 2-way RING (2).
NOTE: Ensure the ARROWS (3) are aligned.
2
INSTALL CARTRIDGES
• Unthread BONNET NUT (1).
• Replace FLUSH PLUG (2) with the pressure balancing
cartridge and reinstall BONNET NUT (1).
• Unthread CAP (3).
• Replace FLUSH PLUG (4) with the diverter cartridge
and reinstall CAP (3).
NOTE: Ensure that the four plaster guard legs have
been sawed for thin wall application.
3
1
2
3
4
1
2