American Standard Aspirations Flash TU061740 Manual De Instrucciones página 5

3
TRIM INSTALLATION
NOTE: Must have RU520 installed before
beginning.
• Remove PLASTER GUARD (1).
• Push two CARTRIDGE SLEEVES (3) over
the cartridges on VALVE BODY (4).
• Insert four SCREWS (5) through MOUNTING
PLATE (2) and thread in to VALVE BODY (4)
where indicated by a dashed line.
• Push ESCUTCHEON (6) on to MOUNTING
PLATE (2) until they are secured with the
snap fitting.
A
4
TRIM INSTALLATION FOR THIN WALL
• Push two CARTRIDGE SLEEVES (3) over the cartridges on VALVE BODY (4).
• Remove the four PLASTER GUARD SCREWS (1).
• Insert four SCREWS (5) through MOUNTING PLATE (2),and PLASTER GUARD (7) and thread in to the
VALVE BODY (4) where indicated by a dashed line.
• Push ESCUTCHEON (6) on to
MOUNTING PLATE (2) until they
are secured with the snap fitting.
A
4
1
4
1
3
1
7
1
2
3
5
2
6
5
6