Garland SET 762 G Manual De Instrucciones página 41

8. MAINTENANCE AND SERVICE
Carry out random inspections on the machine to
ensure an efficient use of the machine. For a complete
maintenance take the machine to your nearest service
agent.
Carry out maintenance work as per the frequency and
table below:
Operation
Air filter
Petrol filter
Spark plug
Cilinder fins
Blade lubrication
Gear lubrication
It is always necessary to stop the machine, wait
for the blades to stop before carrying out any cleaning
or maintenance work on the machine and when
transporting the machine.
Before performing any maintenance or repair the
machine make sure the engine is off and
remove the spark plug cap. Any changes
should be done on a flat and stable surface.
Carry out all maintenance work on a flat surface and
on a clear surface.
WARNING! Do not change the machine or its cutting
elements. An incorrect change to these elements
could cause SEVERE PERSONAL DAMAGES OR DEATH.
•
•
•
•
•
•
41/144
Only use original spare parts and accessories for this
machine so as to obtain the best performance from
the machine. These spare parts and accessories can
be found in the official distributors of the brand. The
use of other spare parts and accessories could result
in risks to the end user, people who are nearby and to
the machine.
Carburettor adjustment is a complex procedure and
must be carried out by the after sales service.
The removal of the security elements, a poor
maintenance or the substitution of spares and
accessories by non original ones can all cause severe
corporal damages.
8.1. MAINTENANCE AFTER USAGE
Carry out the following maintenance work once
you finish your task to guarantee that the machine
functions correctly next time.
8.1.1. CLEANING
Maintain the machine clean, specially the petrol
deposit area and the area near the air filter.
Attention! The cutting tool are sharp and can cause
damage. Use protection gloves when cleaning the
machine.
Use a brush to clean the blade. Never use petrol,
detergents, water or any other liquid to clean the
blades.
8.2. PERIODIC MAINTENANCE
Make periodic inspections of the machine to ensure
that the machine is correct. For a thorough inspection
take the machine to your dealer.
English