GYS GYSFLASH 50-24 HF Manual Del Usuario página 19

GYSFLASH 50-24 HF EN
SAFETY
▪ Explosive gas, avoid flame and sparks. During the charge, the battery must be placed in a well ventilated area.
▪ Acid projection hazard
▪ Protect against rain and moisture.
▪ The charger must be connected to an EARTHED power supply.
▪ If the electricity supply cable is damaged, or if the internal fuse has blown (ref 054653), it must be replaced by the manufacturer,
its after sales service, or a qualified person.
▪ Do not use to charge small batteries (i.e those with a capacity less than the minimum stated on the charger), or non rechargeable
batteries.
▪ Always ensure the Red clamp is connected to the «+» battery terminal first.
▪ If it is necessary to connect the black clamp to the vehicle chassis, make sure it is a safe distance from the battery and the fuel/
exhaust pipe. The charger must be connected to the mains.
▪ After charging, disconnect the charger from the outlet, then disconnect the clamp from the earth and the battery in the indicated
order.
▪ The charger must be positioned so that the socket is always accessible.
▪ This product is not appropriate for people (including children) with low physical capacity or people with no experience or
knowledge.
▪ This product should be disposed of at an appropriate recycling facility. Do not dispose of in domestic waste.
▪ Do not short-circuit the clamps during use.
19