WIKA CPC2000 Manual De Instrucciones página 25

6. Commissioning, operation
6.5.1.3 Steps
Here the step size for the STEP function, in x % of the set range, can be changed.
Possible settings are from 1 ... 50 %.
6.5.1.4 Mode
Here the operating mode of the controller can be set. The following modes can be
selected:
Measure (MEAS): The controller measures the pressure in the set pressure unit
■
Control (CTRL): A set point is automatically regulated.
■
Automatic (AUTO): A stored test routine will be carried out.
■
6.5.1.5 Language
Here the language in which the menu will be displayed can be set. There is the possibility
to choose between German, English, Spanish and French.
6.5.1.6 Settings
ZERO: Switching on and off of the automatic zero point adjustment following exit from
■
the menu. It is even possible to set at what intervals the instrument will automatically
perform a zero point adjustment.
RS232/USB: Selection of the appropriate serial interface
■
DISPLAY: Brightness setting
■
AUTO-MODE: Setting of the pressure range, the pressure unit and number of steps
■
the pressure range will be divided up into. The STEPS UP/STEPS DOWN can be
assigned different values.
INFO: Basic information on the instrument
■
WIKA operating instructions, model CPC2000
EN
25