Using The Led Torch As Motion Sensor - LIVARNO LUX Z31330 Instrucciones De Utilización Y De Seguridad

94381_liv_VDE_LED_Taschenlampe_content_ES_IT_PT.indd 51
Move the sliding switch
position, to use the following light functions
of the front light (10 LEDs):
Pos. 1: 100 % light power
Pos. 2: 50 % light power
Pos. 3: front light flashes.
Using the LED torch as motion
sensor (see Fig. B)
Plug the LED torch
Plug the charger into the mains socket.
As soon as the motion sensor
movement in dark environments, the side
light (6 LEDs)
7
about 20 seconds (+ / - 5 seconds)
into the desired
4
onto the charger
2
5
switches on again for
.
3
registers a
GB/MT 51
23.09.13 15:15