Korg D1WH Manual Del Usuario página 9

Using a damper pedal
You can use the pedal to make your playing more expres-
sive and realistic.
Pressing this pedal will sustain the sound, producing a
richly resonant decay. You can also add the damper reso-
nance to the concert piano, the grand piano and the jazz
piano sound (bank 1 and 2 of Piano1, bank 1 of Piano2).
Using the optional damper pedal DS-1H will let you vary
the amount of damper that's applied according to how
deeply you press the pedal ("half-pedaling").
In Layer mode, you can select the sound(s) where you
want to apply the damper effect. (refer to "Pedal of
layer mode" on page 12)
Effects
Brilliance
This effect changes the brightness of the sound.
The setting can be changed by holding down the BRIL-
LIANCE button and pressing the + or – button beside the
display.
The setting appears in the display with 3 producing a
brighter sound and 1 producing a less bright sound.
The same setting is applied to all sounds and remains ap-
plied until the D1 is turned off. When the instrument is
turned on, the default setting 2 is selected.
Brilliance cannot be turned off.
Reverb
This effect adds ambience and depth to the sound, produc-
ing the sense of performing in a concert hall. As a factory
default, the on/off setting for this effect as well as this ef-
fect's setting are saved with each sound.
Each press of the REVERB button turns the reverb on
(button lights up) or off (button turns off).
To change this setting, hold down the REVERB button
and press the + or – button beside the display.
The setting appears in the display with 3 producing a deep
reverb effect and 1 producing a light reverb effect.
If a different sound is selected or if the D1 is turned off, the
on/off setting for this effect as well as this effect's setting
return to their factory defaults (default settings).
Chorus
Chorus adds modulation to the sound, producing an ex-
pansively rich sound. As a factory default, the on/off set-
ting for this effect as well as this effect's setting are saved
with each sound.
Each press of the CHORUS button turns the Chorus ef-
fect on (button lights up) or off (button turns off).
To change this setting, hold down the CHORUS button
and press the + or – button beside the display.
The setting appears in the display with 3 producing a deep
chorus effect and 1 producing a light chorus effect.
If a different sound is selected or if the D1 is turned off, the
on/off setting for this effect as well as this effect's setting
return to their factory defaults (default settings).
The metronome
The D1 is equipped with a metronome, which can be
changed to a bell sound, which is convenient for practic-
ing.
Turning on/off the metronome
Press the METRONOME button. The
button lights up, and the metronome
starts.
To stop the metronome, press the METRONOME button
again. The button turns off.
Specifying the tempo
When the tempo appears in the dis-
play (default setting of 120), regardless
of whether the metronome is turned
on or off, the tempo can be specified
with the + and – buttons beside the display (The tempo can
also be specified in Metronome Settings mode.). The set-
ting range is �� = 40–240.
To return to the default setting, simultaneously press the +
and – buttons.
Specifying the Time Signature, Volume, Accent
Sound, Tempo and Sound
Use Metronome Settings mode to set the various functions
of the metronome.
1. Hold down the METRONOME button until the Met-
ronome Settings Mode is entered.
The METRONOME button blinks.
2. Push the button to which the function you wish to
set is assigned.
The value will appear on the display.
Accent Sound
Tempo
Volume
Time
Signature
Sound
Hold down the
Metronome Settings Mode
9