Korg D1WH Manual Del Usuario página 12

List of functions
Button Function
Description [default setting]
PIANO1
Pitch
427.5...440.0...452.5Hz [40.0 : 440.0Hz]
In order to adapt the D1 pitch to that of an-
other instrument, you can adjust the pitch
in steps of 0.5 Hz.
The standard pitch is A=440Hz, and the de-
fault setting is 40.0.
PIANO2
Temperament *1
Equal...Pelog scale [00: Equal]
Nine different tunings are selectable, in-
cluding equal temperament, Kirnberger
and Werckmeister temperaments and so on.
E.PIANO1
Volume balance of layer mode 1–9...9–1
1–9 (L aye r 1 m i n .)...9 –9 (B o t h m a x.)...
9–1 (Layer 2 min.) [9–9]
Adjust the volume balance between the
sounds for layer 1 and layer 2.
The setting range is 1–9...9–9...9–1, with the
number on the left for layer 1 and the num-
ber on the right for layer 2.
E.PIANO2
Octave of layer mode (L1, L2)
*2
±1 Octave [00]
Specify the sound range for layer 1 and
layer 2.
The setting range is ±1 octave for each
sound, and –01, 00 and 01 appear in the dis-
play.
HARPSI/
Pedal of layer mode
CLAV
Only 1, Only 2, Both layers [o–o]
Select the layer that the damper effect is ap-
plied to.
The settings are only for the layer 1 sound
(o – –), only for the layer 2 sound (– – o) and
for both sounds (o – o).
VIBES/
Auto power-off *3
GUITAR
Disable, 4 hours [on]
12
Additional Functions and Descriptions
Setting Display
*1: Temperament
Temperament types
27.5...52.5
Display
00
01
02
00...08
03
04
05
06
07
-01, 00, 01
08
About stretched tuning
In order to produce the most natural resonance, PIANO1
and PIANO2 sounds use a "stretched tuning" that makes
the notes of the lower range slightly flatter than equal tem-
perament, and the upper range slightly sharper. This is
how an acoustic piano is normally tuned by professional
tuners.
o–_, _–o, o–o
*2: Octave of layer mode (L1, L2)
1. Select the layer with the + or – button beside the dis-
play.
L1 appears for layer 1, and L2 appears for layer 2.
2. Press the BANK button.
The octave setting (00) appears in the display.
oFF, on
3. Select the octave setting with the + or – button beside
the display.
To return to the default setting, simultaneously press
the + and – buttons.
To select the octave for the other layer, press the E.PIANO2
button to select the layer.
If the sound is in the Single mode, – – – appears in the
display, and a setting cannot be specified.
Temperament
Equal temperament (default setting):
Spacing all semitones at equal pitch intervals, this
temperament is the most widely used.
Pure temperament [major]: Major chords in the
key (C) are perfectly tuned.
Pure temperament [minor]: Minor chords in the
key (C) are perfectly tuned.
Arabic: This scale includes the quarter-tone inter-
vals used in Arabic music.
Pythagorean: This ancient Greek scale is espe-
cially effective for playing melodies. It consists of
perfect fifths; however, other intervals – the major
third in particular – is out of tune.
Werckmeister: The Werckmeister III scale was
created in the later Baroque period to allow rela-
tively free transposition.
Kirnberger: The Kirnberger III scale is used
mainly for tuning harpsichords.
Slendro scale: This is an Indonesian gamelan
scale with five notes per octave.
Pelog scale: This is an Indonesian gamelan scale
with seven notes per octave.